Liberty Pumps®
Liberty Pumps® 405, 54 gpm Flow Rate, 2 in FNPT Inlet x 2 in FNPT Outlet, 1 ph Phase, 1/2 hp, Polypropylene
Liberty Pumps®, 405, High Temperature Fully Automatic, Series: 405, 54 gpm Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 VAC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions
- Attributes
- Item Features
- Specifications
- Documents
Attributes
BrandLiberty Pumps®
Amperage Rating7.3 A
Bearing TypeSealed
Cord TypeSJTOOW 10 ft
Domestic/ImportDomestic
Flow Rate54 gpm
Horsepower1/2 hp
Impeller TypeVortex High Temperature Engineered Polymer
Inlet Size2 in FNPT
MaterialPolypropylene
Motor Speed3450 rpm
Outlet Size2 in FNPT
Phase1 ph
Series405
Temperature Rating180 deg Continuous
Voltage Rating115 VAC, 230v
Item Features
- Pre-assembled and ready to install
- Fully automatic operation
- High head, high temperature
- Separate access cover for easy switch inspection
- Integrally molded rubber gasket for a superior gastight seal
- QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
- Oil filled, hermetically sealed motor with thermal overload protection, 10 ft three wire power cord with grounded plug
- Corrosion-resistant polyolefin basin with molded in connections
- Maintenance-free, permanently lubricated sealed bearings
- 10 ft power cord with ground plug
- 3/8 in solid handling
Specifications
- Basin Capacity
- 5.5 gal
- Inlet
- 2 Inch FPT
- Phase
- 1
- Solids Handling
- Up To 3/8 Inch
- Weight
- 16 lb
- Additional Information
- Basin Capacity: 5.5 gal; Inlet: 2 Inch FPT; Inlet Height (from bottom of basin): 12-5/8 Inch; Maximum Fluid Temperature: 180 deg F; Phase: 1; Solids Handling: Up To 3/8 Inch; Vent: 2 Inch FPT; Weight: 16 lb
- Height
- 14-1/8 Inch
- Discharge
- 2 Inch FPT
- Standards
- C/US CSA Certified, SSPMA Certified
- Vent
- 2 Inch FPT
- Type
- Commercial High Head
- Maximum Fluid Temperature
- 180 deg F
- RPM
- 3450 rpm
- Voltage Rating
- 115 volt
- Cord Length
- 10 ft
- Width
- 13-3/4 Inch
- Amperage Rating
- 7.3 amp (Full Load), 16 amp (Locked Rotor)
- Inlet Height (from bottom of basin)
- 12-5/8 Inch
- Horse Power
- 1/2 hp